Hydrogen Refuel Units
H2 refueling stations consist of a high-pressure storage unit, in which hydrogen is stored at 300–700 bar, as well as a refueling nozzle.
They allow for the simple refueling of hydrogen vehicles within just a few minutes. The T series refers to cost-effective refueling stations that operate without an additional compression unit. The V series, on the other hand, includes an integrated H2 compressor, which shortens the refueling time and increases the achievable driving range per refueling process.
T-1
Die Wasserstoff-Tankstelle T-1 dient zur Speicherung von Wasserstoff, sowie der Betankung von Wasserstoff betriebenen Fahrzeugen.
Die T-1 besteht aus einer Blechkonstruktion, Armaturen zum Anschluss an das Flaschenbündel, sowie einem Befüllschlauch mit Tankstutzen. Die Blechkonstruktion sowie Tankarmatur werden an ein bestehendes Wasserstoff Gas-Flaschenbündel 12x50l montiert.
T-2
Die Wasserstoff-Tankstelle T-2 dient zur Speicherung von Wasserstoff, sowie der Betankung von Wasserstoff betriebenen Fahrzeugen.
Die Speicherung des Wasserstoffs erfolgt in einem 12x50l Gas-Flaschenbündel. An dieses wird über eine Verrohrung eine Tankbaugruppe angeschlossen, in welcher die Befüllarmatur vor Umwelteinflüssen geschützt aufbewahrt werden.
T11
Hydrogen filling station for use in the private sector.
The hydrogen filling station T11 is used for storing hydrogen and refueling hydrogen-powered vehicles.
The T11 consists of a stainless steel construction (A2), fittings and piping (A4) for connection to a gas cylinder bundle 12x50l, as well as a filling hose with tank nozzle.
T11-RM
Hydrogen filling station with permit according to §18 BetrSichV.
The hydrogen filling station T11-RM is used to store hydrogen and to refuel hydrogen-powered vehicles. An emergency disconnect coupling prevents hydrogen from escaping if the refueling hose is torn off.
The T11-RM consists of a stainless steel construction (A2), fittings and piping (A4) for connection to a gas cylinder bundle 12x50l, as well as a filling hose with tank nozzle.
T12
Hydrogen filling station for use in the private sector.
The hydrogen filling station T12 is used for storing hydrogen and refueling hydrogen-powered vehicles.
The T12 consists of a stainless steel construction (A2), fittings and piping (A4) for connection to a gas cylinder bundle 12x50l, as well as a filling hose with tank nozzle.
T12-RM
Hydrogen filling station with permit according to §18 BetrSichV.
The hydrogen filling station T12-RM is used to store hydrogen and to refuel hydrogen-powered vehicles. An emergency disconnect coupling prevents hydrogen from escaping if the refueling hose is torn off.
The T12-RM consists of a stainless steel construction (A2), fittings and piping (A4) for connection to two gas cylinder bundle 12x50l, as well as a filling hose with tank nozzle.
T14
Hydrogen filling station for use in the private sector.
The hydrogen filling station T14 is used for storing hydrogen and refueling hydrogen-powered vehicles.
The T14 consists of a stainless steel construction (A2), fittings and piping (A4) for connection to a gas cylinder bundle 12x50l, as well as a filling hose with tank nozzle.
T14-RM
Hydrogen filling station with permit according to §18 BetrSichV.
The hydrogen filling station T11-RM is used to store hydrogen and to refuel hydrogen-powered vehicles. An emergency disconnect coupling prevents hydrogen from escaping if the refueling hose is torn off.
The T11-RM consists of a stainless steel construction (A2), fittings and piping (A4) for connection to four gas cylinder bundle 12x50l, as well as a filling hose with tank nozzle.
Tankausleser
Tank reader for displaying the most important tank parameters of hydrogen vehicles.
CONTACT
If you have any questions or would like to report a problem, please contact our support.