Compressor V-1
MENU
Compressor V-1
Description
The H2 compressor V-1 is used to increase the pressure of hydrogen. The single-stage compressor features a pneumatic transmission. Compressed air (8 bar) is applied to the low-pressure side. On the high-pressure side, the resulting force is used to compress hydrogen, gradually increasing from 40-60 bar up to >300 bar.
| GN | Connection Description | Connection Type | Info |
|---|---|---|---|
|
(1) |
H2 IN |
Clamp Ring Fitting 10 mm |
Min. pre-pressure 10 bar |
|
(2) |
H2 OUT |
W30x2 LH DIN477-5 Nr.57 |
Max. outlet pressure 300 bar |
|
(3) |
Luft IN |
Compressed Air Connection NW7,2 |
Working Pressure 8 bar |
|
(4) |
Drucksensor |
M12x14-core cable |
Pin assignment see sensor |
| Characteristics | ||
|---|---|---|
|
Delivery capacity (40 bar pre-pressure) |
Nml/min |
38 |
|
Delivery capacity (50 bar pre-pressure) |
Nml/min |
47 |
|
Delivery capacity (60 bar pre-pressure) |
Nml/min |
56 |
Price without VAT
9.995,00 €
Maintenance
The system is maintenance-free.
Contact
If you have any questions about V-1 or would like to report a problem, please contact our support